|
Product Details:
|
| Power: | 2.2Kw | Collet/Nut: | ER20 |
|---|---|---|---|
| Router Bits Diameter: | 1~12mm | Voltage: | 380V/220V |
| High Light: | Air Cooled CNC Spindle 220V,Air Cooled CNC Spindle ER20,2200w CNC Machine Spindle |
||
220V 1 Phase ER20 Size 2200w Wood air Cooled Spindle
Power:2200w
Speed:19000rpm
Cooling method: air cooling
Frequency:400Hz
Voltage:220V/380
1.Air cooling has a good heat dissipation effect
2.Four bearings, high power and long service life.
3.The meticulous encapsulation process makes the rotor fuller and more durable. Copper alloy commutator has higher hardness and stronger wear resistance.
4. Pure copper galvanized cooling water pipe joint
| Power | 2.2kw | Voltage | 380V/220V |
| Current | 4.8A | Frequency | 300Hz |
| Rotate speed | 18000RPm | Cooling | Air cooling |
| Collet size | ER20(Φ3.175~13mm) | Bearing | 7005C*2&7002C*2 |
| Power | 3.5kw | Voltage | 380V/220V |
| Current | 7.2A | Frequency | 300Hz |
| Rotate speed | 18000RPm | Cooling | Air cooling |
| Collet size | ER20(Φ3.175~13mm) | Bearing | 7005C*2&7002C*2 |
| Power | 3.5kw | Voltage | 380V/220V |
| Current | 7.2A | Frequency | 300Hz |
| Rotate speed | 18000RPm | Cooling | Air cooling |
| Collet size | ER32(Φ3.175~16mm) | Bearing | 7008C*2&7002C*2 |
| Power | 4.5kw | Voltage | 380V |
| Current | 9.2A | Frequency | 300Hz |
| Rotate speed | 18000RPm | Cooling | Air cooling |
| Collet size | ER32(Φ3.175~16mm) | Bearing | 7008C*2&7002C*2 |
| Power | 6kw | Voltage | 380V |
| Current | 12.8A | Frequency | 300Hz |
| Rotate speed | 18000RPm | Cooling | Air cooling |
| Collet size | ER32(Φ3.175~16mm) | Bearing | 7008C*2&7002C*2 |
Maintenance
After receiving a new electric spindle, it will start at a low speed of 6000, and increase it by 3000 every ten minutes, until it can be used normally after 24000 revolutions. The bearings inside the new spindle need to be preheated and run-in, so remember! In addition, in order to prolong the service life of the spindle, it is best to start the spindle for a test run for 10-15 minutes during normal use.
FAQ
1. who are we?
We are based in Shandong, China, start from 2014,sell to North America(5.00%),Eastern Europe(4.50%),Africa(3.00%). There are total about 101-200 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
spindle motor, stepper motor,cnc router drive,frequency inverter,cnc control system
4. why should you buy from us not from other suppliers?
We are a professional CNC router parts wholesaler , experience more than 12 years We not only produce CNC parts but also sell other famous brand CNC parts.
Just tell your needing, we will help you buy with factory price and quality.
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,FCA,Express Delivery；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,MoneyGram,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English, Chinese
Contact Person: Tonny
